OKI White Toner Printers – Revolutionizing Printing Versatility
We also answered 20 minutes of live questions and have distilled those down into the most requested information – Answers to YOUR questions are probably here too!
FAQ
All of the samples shown are from either the OKI 8432WT or the OKI 9541WT [Now branded the “Crio” 8432WTD and 9541WTD white toner printer]
Yes – there’s NO slow peeling with EZ Peel Paper for White toner Printers
That is a kind of textured silicon.
Use the One Step Paper for light garments/items where washability is not as much of a concern
Lots of ways to answer this question! Washability depends on the quality of the shirt, the negative space in the design, how you wash it and how you dry it. There’s no single answer.
Just visit http://digitalheatfx.com and chat with a rep there.
You can see your options here: https://colmanandcompany.com/DFX_Paper.html but it’s normally about $2.90 – $4.00 depending
Yes – there’s NO slow peeling with EZ Peel Paper for White toner Printers.
No plans for making Print Optimizer a native mac application
You’ll have to do your own math on this because it depends on the set up charge for the screen print transfer and whether or not you’ll need variable sizes.
All temperature, pressure and time answers are dependent on the paper you’re using – all of that is covered in trainingAccordion Content
We don’t recommend putting them in the dishwasher. With hand washing the mug prints should last a long, long time.
We actually used some EZ Peel AB Paper and some One Step and some of our new Hard Surface paper
Good! Just keep them out of the dishwasher
EZ Peel paper is best, but Neenah’s Exostencil is great for making screens
They’ll wear off with play just like any print, but will last just about forever in the glass case shown in the webinar.
Yes – we’ve used it with polymesh shorts and tops
We’re actually showing a soccer ball! If the material can stand up to the heat and pressure of a heat press you can typical apply one of these transfers
You can find that GeoKnight DK3 Mug press right here: https://colmanandcompany.com/DK3.html
That really depends on your market. We’ve seen anywhere between $6 and $12!
If you’re printing in full color then HTV isn’t an option. You might want to use HTV though on large, single color designs without any weeding needed. Keep your labor in mind!
Yes. You can find that right here: https://colmanandcompany.com/EZ_Metallic.html
Sure – the OKI printers are LED Printers (like laster printers) so you can print just about anything in there that you could with a regular printer.
Different media is available for different types of objects you might be decorating. Hard goods, Light Shirts, Dark Shirts,…
You really can’t heat press onto conical items – it’s complicated!
The Pro9541WT [Now branded the “Crio” 9541WTD white toner printer] is toner-based, so no clogged head risk at all.
Yes you can – but the transfer WILL cut with a knife so you should decorate the other side.
Pricing is right here, but chat with a rep for specials! https://digitalheatfx.com/digitalheat-fx-pro8432/
Those mugs we found just laying around the office – nothing special!
http://digitalheatfx.com, just chat with a rep
Yes, they’ll work with any of the OKI White Toner Printers
No post treatment is NEEDED, but it won’t hurt
It’s a skill and a talent that takes time like anything. In the meantime you can order graphics created from http://coldesi-graphics.com
You can get specific instructions during training.
Yes, though we RARELY recommend it. Print Optimizer comes with all of our bundles; it helps reduce toner use and give you specific settings optimized for each paper
Print Optimizer is not natively Mac – but you can use the OKI printer directly.
Holds up pretty well – we’ve got some customers that have done golf flags for events.
2 Years – on site from OKI
There is metallic pater available.
No – the toner/ink is different for sublmiation – but you really don’t need that as the regular transfers will apply to almost anything.
You can print on smaller sizes. Easily 4×6″.
There is a drum and a fuser that needs replaced periodically, depending on use.
You can find all of our paper and supplies here: https://colmanandcompany.com/Digital_Heat_FX_Supplies.html
Do you have technical questions?
ColDesi Customers check your training.coldesi.com for updates or visit support.coldesi.com to contact our support staff.
If you aren’t a ColDesi customer reach out to our staff at 855-348-4839 to learn about training and support package. Or simply fill out the form below.