DigitalHeat FX is proud to announce our new flagship Direct-to-Film Transfer Printer, the DTF-24H2.
Taking the fast fashion on demand market by storm, this revolutionary DTF transfer printer has a whopping machine output that is up to FIVE TIMES faster than DTG machines which cost thousands of dollars more.
The Raw Machine Output (RMO) on the DTF is what makes this new technology so revolutionary. You can produce brilliant full-color prints:
It’s like nothing you’ve ever seen.
Keep reading to learn how the DTF-24H4 printer can deliver direct film transfers (DTF Transfers) better than any other DTF on the market.
The DTF-24H2 produces brilliant digital transfer sheets, handling everything from single color shirt labels to left chest logos to full-size prints. The DTF printer uses PET transfer film which is translucent so you can see the design underneath the film when you later heat-press it onto the garment. The PET film has a thickness of around 0.75mm which allows for better transfer characteristics. The films used with the DTF-24H2 are both roll-fed and designed for a cold peel.
The printer has a dual print head design that lays down the colors in a blend of CMYK colors with the first printhead, and then lays down the perfect amount of white underbase on top of the colors in perfect alignment so that you do not have any white peeking out. The alignment is on the film, rather than on the bumpy fabric of the shirts so it creates a crisp design edge that you can’t even get with traditional screen printing.
As part of a Digital HeatFX system, which includes the Print Optimizer software, you will have ultimate control over the ink laydown. If you are doing blended gradients you can dial in the color accuracy on a per-channel basis. If you are doing single color logos on white shirts, you can dial down the ink flow and put just the right amount of ink to make the shirt pop without ink waste.
The DTF-24H2 also has a heated print path that begins the drying process immediately after the print. The white ink layer on top will become dry to the touch-ready to receive the specialized powder adhesive coating.
It’s the unique powder adhesive coating that gives DTF prints their signature soft touch. Instead of thick transfer films, or vinyl’s, the Direct to Film Process has only two ingredients. The ink, and a thin coating of powered adhesive.
The soft hand of DTF is holy grail of custom apparel. It’s never been possible to get the incredible soft feel of half-tone screen printing in a transfer process. But with DTF, you get all that and more.
The DTF powder adhesive is moisture-seeking, so it draws itself into the ink of the print and chemically bonds to form a strong permanent adhesive that sticks extremely strong to both cotton and polyester fibers.
The beauty of the DTF system by Digital HeatFX is that you can store your high-quality transfers for up to 6 months or more. This allows you to keep separate your print operations and your assembly line(s).
With other technologies such as screen-printing and DTG, you must bring the garment to the printer.
Your ability to create finished goods depends on how many garment holding stations your printer has.
But with DTF, your print speed, and raw machine output of the printer his much greater. If you are printing left chest logos, for instance, and you can print 8-10 copies of the same logo in about 10 seconds. You can add as many assembly stations as you need to make the most efficient use of the incredible machine output.
So, what’s making automatic screen print shops switch over to DTF Transfer Printers? The benefits are enormous:
Mark our words here, DTF is no less than a technology revolution for the Screen-Printers. You can print up the designs for an entire order AND print up enough extra transfers for your FILL-IN orders all at once. Then you simply press the transfers on whatever garments you need. All in about 10 seconds.
If you’re in a rush, your final speed of assembly is ONLY limited by the number of heat presses you have.
Some Shops will employ dozens of skilled heat press assemblers and bagging helpers just to keep up with the raw machine output (RMO) of their DTF transfer printers.
This idea of parallel assembly of the DTF Transfers to the garments is also the PRIMARY strength vs high end DTG machines like the Kornit, and Aeoon. With those machines, the machine operator is stuck standing in front of the DTG machine constantly, making sure that every shirt is perfectly flat. Most of their time is spent idle, simply waiting for the machine to print.
The DTF process is different. The print function is separate from the application function.
You don’t have to bring the shirt to the machine. Instead, you bring the image to as many shirts as you want.
Some other benefits over DTG:
DTF Works With all Kinds of Garments:
Complete this form below and one of our professional account reps will contact you.
Call (855) 348-4839, chat or fill out the form below to learn more.
There's a BIG DEAL going on RIGHT NOW! Find out more and get your questions answered.